| Description |
Specification |
Tank Capacity : |
20KL |
| Overall Dimensions : |
02600 x 5850ht |
| Inner Tank : |
02400 x 4600ht |
| A) Upper Shell : |
02Nos. S.S.304 - 2.0mm thk |
| B) Lower Shell : |
02Nos S.S.304 -2.5mm thk |
| C) Top Cone : |
S.S.304 - 2.5mmthk |
| D) Bottom Dish : |
S.S.304- 2.5mmthk |
| Outer Tank : |
02600 x 4850ht |
| A) Shell : |
S.S.304 -2.0mm thk |
| B) Top Cone : |
S.S.304 -2.5mm thk |
| C) Bottom : |
MS Taper Structure to suit bottom slope of inner tank fabricated in section. |
| D) Railing : |
Dia 38 mm S.S 304 pipe with vertical Supports - 1000mtr. Ht |
| E) Ladder : |
Fabricated from Dia 38mm S.S. 304 pipe |
| F) Guard for Ladder : |
Fabricated from 30x3thk S.S. 304 flat |
Alcove Offectional
(Not included in cost): |
2mm thk- 1500x1200x1000 (offetional) |
| Insulatin : |
1. 25mm thk rock wool layer compressed to 10mmthk
2. Two Layer of thermocol 50mm thk |
| Connections : |
All standard connections as per N.D.D.B standard |
| |
All standard connections as per N.D.D.B standard as follows
1. Elliptical Manhole 380x540
2. Outlet& Inlet - 0 63mm
3. Air Vent - 0 150mm
4. Spray Ball - 0 50mm
5. Sample Cock- 0 1/2 inch Revolving Type
6. Liffting legs- 3 Nos
7. SGLS - 1 No. each Std.
8. Temp. Indicator - Digital
9. Low Level - 01"
10. High Level - 0 1" |
| Agitator : |
Top Mounted - 3HP |
| Stiffening Rings : |
ISMC 100x50 - 4Nos./ Fabricated rings |
| Polishing of Outer Tank : |
S.S.Outer S.urface will be Polished to 150grit |
| Milk Contract Surface Finish : |
All the surface coming in contact with milk will be finished to 150 grit. |
